Quote:
Originally Posted by DaveWM
That seem odd, with a good CRT and the G2's turned up 7/8 the pic should be way bright. Something is not right. The thing with CRTs is if you the correct HV and the votages are right and the CRT has good emissons it pretty much has to work right (brighness).
should be interesting to get the readings. something is off on the bias maybe in the cathode circuit after all (back to the video amp).
if all the cathodes are too high it would cutoff the CRT, the driver transistors get there signal for the luma from the emitter circuit, the base is the chorma.
for grins check the emitter voltages of those 3 power transistors (should all be the same about 16v no signal)again be careful on slip and you will ruin the transistors.
|
Okay, the G2s are: Red=488V Green=453V Blue=456V
How are those numbers? And it's not the G2s that are turned up that far, it's the brightness control on the front of the set that up.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|