Quote:
Originally Posted by DaveWM
what does the sams say the G2s should be? that seems low to me.
before doing anymore work on the jail bars you need to get the brightness thing worked out.
do the setup per the sams, (with the service switch) then check the brightness control and the G2 voltages.
and yes the diode is fine.
|
Okay, the SM shows: Red=590 Green=640 and Blue=540
So I need to bring the G2s up to roughly those values? I know they go that high and higher from testing, but didn't know I was aiming for those values when adjusting.
I'll have to do it tomorrow. Got a busy day today.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|