Quote:
Originally Posted by DaveWM
you need to check the other voltage at the pins of the CRT the cathodes/G1 and G2.
It does not follow that you can not get the setup to work with the switch. If the crt test good it should work, if it does not work there is a problem.
|
Kind of late, but my skills at reading the schematics must be getting better. I just found that there are test points for the G1s at the chroma gain taps. Seems T, S and R are the G1s and you can measure the voltage from there. I just did that and got the same voltages there as the pins (well within a volt). 
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|