Quote:
Originally Posted by DaveWM
hard to say about the scope you should be able to increase the size with the vert amp and stretch it out with the sweep rate.
Don't know what to tell you bout testing the emitters. I would test the way the sams says to. We are trying to figure out why the setup does not work. Until you get that working I would hesitate to work on anything else.
I think the bias voltage are off, so i would concentrate on those transistor voltages.
|
Okay, I did the emitters and all of them had a normal of 15.7V and a setup of 16.2V. each of the 180ohm resistors on them were within tolerance (about 176ohms each).
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|