Quote:
Originally Posted by zeno
Absolutely. There are often pre drilled holes on the
chassis to mount the controls also. Finding the right
value & mounting is the challenge. ( use 5K's)
73 Zeno  |
Well there are holes, but they're blocked by the heat sinks. If I rotate the heat sinks, the holes are uncovered. Then there's the issue of the transistor sockets. They're pretty close to the holes, so I'll have to find the smallest 5K pot.
I'm assuming the pot should be rated higher than 200V, right? Maybe somewhere near 350V.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|