|
Best way to remove this pot
I have to replace the pot in the picture and it has three legs inserted into the terminal strip. I know there are two tabs that have to be positioned, but are these pots just inserted into the terminal strip, inserted into solder filled posts or inserted into the posts and the ends stick out and get soldered?
I have only a 35W iron, so if it's solder filled, I'm out of luck. If it's just the tips, I have a 45W with a sucker head that should do the trick.
Thanks
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|