Quote:
Originally Posted by Username1
This is some interference from a ringing of a sharp blanking diode, or transistor, or damper, etc. that is not decoupled properly. Take a scope and see if you can see it on the power supply near the video amp transistors.
Did you re-cap this set?
|
I went through and replaced all transistors in blanking, video output, amps, etc. There was no change and I put all the originals back and kept the new for backups. I replaced the blanking diode and the resistors that work with it, but that didn't help. That leaves the three diodes around the horizontal output and I'll be ordering them tomorrow.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|