Thread: Well a bit of good news on the Avanti
View Single Post
  #1  
Old 09-08-2013, 06:14 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
  
Join Date: Sep 2008
Location: So Cal, CA
Posts: 1,010
Well a bit of good news on the Avanti
I replaced the seized convergence coil and the pot making the clicking sound. I then used a grid pattern from a test DVD instead of the generator (more lines). After about 10 minutes, I managed to get the following. It's not perfect (almost as good as my other CCII), but I can definitely live with it.

Thanks to all for your support on this issue. If I can get rid of the jail bars, I'll be set (I can live with the moire for the most part).

Thanks again!
Attached Images
File Type: jpg Finished Convergence Small (2).jpg (81.5 KB, 28 views)
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote