Quote:
Originally Posted by zeno
http://www.antiqueradios.com/forums/...?f=15&t=194005
Just found this so I aint dreaming. The 9-90-02 was in
later CC II uprights & had an IC & hoz hold IIRC. If there are
no changes other than "matching" the pins it will
be easy to make one. Really need to find someone that
has one to be sure............
73 Zeno 
|
My 19JC55Z has a 9-90-01B and it doesn't suffer from the waving.
I have a spare, used, 9-57 and don't mind modifying it. So if anyone has any suggestions for changes, let me know.
Also, I'll check out the 330ohm resistor you mentioned.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|