|
...I'll dig through my limited amount of Zenith Tech Tips and see what is available. Zenith and GE both produced modules that were mod'd to accept the wide range of horizontal sync from VCRs. In the early days of the web, there were even websites with suggested mods for tube and solid state sets.
If anyone else has Zenith Tech Tips, do TCA a favor and check. It'll be a day or so before I can sit down and go through them - I start in 1972 and stop in mid-1977, so it may be for nothing. Doug/DRH4683, are you following this saga???? I know Doug has some Tech Tips, and may have beyond what I have. I think the Zenith manual for the Avanti is either CM-122 or CM-123, so folks that might have the tech manual, give it a check for any VCR mods.
I don't have that range of manuals - I stop after the 20Y1C38 or similar set until the System 3 stuff. All my CCII stuff went to a friend with 6 of the EC/GC sets.
CHeers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
|