|
Okay, that explains why the $25, it was for the matched pair with the large black Varistor.
The one I have seems to start at about 17 Ohms, heating it on the stove it went up to over 200 Ohms, probably more but the meter was set on 200 and it exceeded that.
A Workman FR1010 starts at 16 ohms but they don't say if it goes up or down with heat or what the load is supposed to be, I would assume it has to go up. It would help if I knew the OEM Zenith number but there's nothing on the old one.
The chassis is a 17EC45 if that helps.
|