Quote:
Originally Posted by zeno
The bending is NORMAL on that set. I am pretty sure
there was a different module available for that set.
I think it was called 9-57-VCR but you will have to find
someone with the factory bulletins to look it up.
Then you have to find one !!
There were also mods for 6U10 sets IIRC.
Before you go nuts be sure the 330 ohm on the
9-57 is OK, they all went. Change it to a 1 watt if its not.
Wont fix it but will improve it.
73 Zeno  |
Perhaps the 9-70 is the 9-57VCR??
http://videokarma.org/showpost.php?p...72&postcount=6
Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
|