Quote:
Originally Posted by andy
You should disconnect the 1.2K and 2.7K resistors, and connect one end of the pot to the L tap, the other end to the H tap, and the wiper arm to the movable wire.
|
I'm not sure I understand how that works. The Hi tap is full w/no resistors. So why doesn't a pot between it and the wire create the resistance like the ones in series on the Med and Lo? If I cut out the resistors, then the exact amount on the Hi would be present on both the Med and Lo. Leaving the pot to do the same it's doing now.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|