Quote:
Originally Posted by zeno
 First I must say I am proud of you. If it were the olden
days I would have got you a Master Tech licence as soon
as your required 2000 hrs on the permit was up.
Yes that sure looks like it. If you havent yet check everything
in the ABL from the tripler on. Also see what effect the ABL
control has on the lines. Also see if its at #115 at 9-90 module.
Should be a nice clean horz pulse there.
You can also disable the ABL by grounding the B of Q201 &
see if the lines go away.
If not its getting in somewhere else but this still is an
important clue.
Keep up the good work
73 Zeno  |
Oh, you mention the 9-90 module. I'm assuming you mean the horizontal board? If so, that's a 9-57 in my set. I see the 115 is the horizontal pulse. Should I go directly to the emitter leg or is the board connector good enough?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|