Quote:
Originally Posted by jr_tech
I'm not sure that I understand your use of the term "lower" in this case... For example, if the scope knob is set for 10V/div and you use the 10x probe, is the waveform measurement on the scope now? :
a) 1V/div
b) 100V/div
jr
|
With the probe in the 10x mode it would be 10 volt / div. Isn't that how it works? If I set the scope to 1 volts/div and put the probe in 10x mode, it would reduce/lower/attenuate it by a factor of 10 and the display should be read as 10 volt/div?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|