|
Okay, there seems to be an issue with the "Trig view" button. When I measure AC in the 50V / Div setting, it covers 7 divisions. I know that's not correct. So when I push the "Trig View" I get the proper waveform and the right number of divisions (2 1/2 divisions). That same button, if you pull it, is the bandwidth limiter. If I play with the button, it eventually shows the proper waveform height. If I touch it again, it gives the expanded waveform again. It's like it's dropping from 50V/div to the next lower setting.
It could be a dirty contact in the switch. I'm going to contact the company I got it from to see if it's okay to give it a shot of Deoxit. If I can't get it going I'm going to have to send it back for repair.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|