Quote:
Originally Posted by Username1
""
Well then I feel better. Now I need to get back into the set to recheck the horizontal sweep as the PP I got put it at 160V and the Sams says it should be 120V. Since the board is driven by the 125V B+, I don't see how it could be putting out a 160V waveform.
""
Is the B+ correct ? are all the B+'s however many there are correct ?
How about B Boost over by the HOT ?
|
The B+ is at 129V and the B+ Boost is 247 and the same voltages at all their connections points. I'll have to check the other B+s that are in the 20V range. I believe there are two of them (one around 23V and the other around 29V).
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|