Quote:
Originally Posted by Username1
as long as those larger ones are under control, don't worry too much about the smaller ones right now.... Stick to the ones you are getting that look too high. tp5.
|
Okay, just checked the horizontal pulse which should be 50VPP. I set my scope to 50V/Div and got the noted waveform in Sams as well as a PP of one division. So that one is correct, so the scope seems to be working properly. I've found another TP I'm going to try. It goes to the convergence board and is 170VPP. That should tell me if my scope and/or probe is handling higher voltages correctly.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|