|
Okay, so how do I go about checking my scope for proper AC voltage calibration? I just tested another point that is supposed to be 170VPP. With the scope on 50V/Div I get almost 4.5 divisions. That's almost 225VPP. I checked with my DMM and it reads as 130VAC. I check the one next to it that was supposed to be 20VPP and it showed as 25VPP. The DMM had it as 16.9VAC. I'm pretty sure my DMM isn't showing the exact voltage (everyone keeps writing about RMS and such).
I need to know if there's something wrong with my scope. If so I need to return it to be fixed.
Thanks!
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|