Quote:
Originally Posted by Username1
If that 125v is too high, look at c248 in the power supply.... 3.5mfd off the 235v leg on the transformer....
128v at the diode there just before the filters and choke.
Also q212 voltage regulator.... Take a test of the 23v source on the scope, and dmm, that voltage should be spot on, and across that zener diode, should be 24v spot on....
good test for your dmm and scope for dc....
|
I'll do these next. I've been going over the 125V sources and they all show up as 129V. The DMM and scope are in agreement there. I also checked the 125VAC and did the math. The DMM showed 128V and the scope had 126V after doing the calculation given me for RMS.
I'll let you know the voltages asked for.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|