|
[QUOTE=Username1;3084085]I'm posting 2 more pictures. In the horiz osc, driver, I would like you to measure the voltages of the driver transistor and post them. I believe its q803. I would also like to check the caps attached to the coupling transformer between the driver and HOT.
Also check that 2200 ohm resistor between 124 and 123 is it ok....?
If the emitter voltage of the driver is too high, you'll have to check that 40 ohm resistor in that circuit.QUOTE]
Okay, finished testing what you noted. The 20pf (C814) is 19.8, the 2Kohm resistor (R821) is 2.5Kohm (this one has no percentage band so I don't know if that's too far off), the .22uf (C811) is .23uf and the 40ohm resistor (R819) is 47ohm.
Do you want me to test the voltage of all three legs of (Q803)? Do you just want DMM readings, scope or both? This little bugger's a pain as it's right behind the large capacitor and it's a pain to get the hooks on the legs.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|