Quote:
Originally Posted by Username1
I'm not too sure what to think of next either....
Well, you know about now, I would be taking a small cap and jumping those caps after the collector of the HOT with the set on and watching the screen to see what it does.... Not recommended, But if you ran across a spot that made a change in those jail bars, it might be worth it....
Do you think anyone ever removed a metal shield from somewhere and never put it back ?
I really don't think its in the yoke, so it's probably a bad yoke....
|
Those caps after the HOT are all the safety caps. They're all new.
All the shields seemed to be in place when I got it. The only one removed was when I put in a new, updated, subcarrier regen module. It was redesigned with a small shield on it to protect from interference. The last person to adjust the APC stripped the plastic slot in the pot and then pushed it so hard they broke it free from the solder joint. The jail bars were there with the old and still there with the new, so I'm sure it's not the shielding.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|