|
well I think its the vert out trans, it was sputtering in the audio, would colapse,jumpy vert scan then if finally gave out, and the HV went away as well. My guess is it was killing the B+ with a short, maybe in the convergence windings. I unplugged the convergence and the HV came back, the scan is about 1/2 what it should be but no more sputtfering around or colapsing.
I have a 1076 that I can try driving the vert out trans with, but at this point I need to check a few more things. the Screen voltage on the vert out was only about 1/2 the voltage it should be, not sure if its drawing massive current or if a resistor has gone high, but it would be a lot easier to work on with the chassis out. Its a combo so I guess I could try mounting the chassis back in and working thru the service saver, but its a major pita being a combo.
|