Quote:
Originally Posted by Kamakiri
Voltages are all screwy. I've got 295V on pin 3 of the 6V6 (should be 220VDC), and 261V on pin 4 (should be 200 VDC). Also showing 262V on pin 2 of the 6SL7 vertical output (should be 210 VDC). I've yet to find any negative voltage. Bear in mind also that my experience level isn't as high as a lot of you, but I'm learning quite a bit.
This set was a real hack job when I got it, so at this point anything could be suspect.
|
High voltages on the plate of the 6V6 seem to indicate the tube is not conducting. The question is now why? How about the grid and cathode. Are they where they belong?