|
Quote: "Is there a systematic way to do this project without spending most of my time running in circles?"
No, not really!
I re-wired a Philco 40-115 (and others) and I look at all the crumbling wiring as a roadmap. I basically started at one end of the chassis and worked my way across. I followed along by terminal to terminal. Do the filament wiring, the B+ and notice how it flows. You can't just do it by circuit to circuit as there are too many interconnects. Make drawings/notes as you go along and confirm things with the schematic before and after.
Simple but time consuming and figure in a stopping point so you can continue fresh the next day.
|