Quote:
Originally Posted by TVTim
My Zenith (see avatar) does the same thing once it is on for a few minutes. It will go away if I literally lift the back just a little (1/2 inch or so) and drop it on the table. Works fine after that. Could mine have a similar issue?
|
Could be but IIRC the CTR board didnt have much on it.
The control board up front ( color, tint etc) is a double sided
PCB & the feed throughs went intermitant. Again light
tapping around the chassis will usually smoke it out.
Also when you get changes in color turn the color all the way
down & see if the B&W picture is changing also. Narrows things down a lot.
Remember a good color TV has to be a good B&W FIRST !
73 Zeno
