|
surprise surprise surprise as gomer pyle would say , I tested the 3 capacitors I removed , the .001 @ 2000 volts is ok , the .047 @ 600 volts is ok and the .01 @ 400 volts is ok , so looks like replacing others would be a waste but I will check the ones that are known to go or be bad , looks like I'm just going to do the electrolytic capacitors since one was bad in 1979 I wont chance the others and slowly power it up , I will check power resistors and anything that might not look right before doing so.
so this set has a non bonded safety glass (21FBP4) ? , if that's the case it sure is tempting to clean it but a lot of work , theres is a couple spots that look odd , I thought maybe it was cataracts but this may be just dirt , hopefully it's not annoying while watching .
sorry I don't have pictures and step by step on this restoration.
mike
|