|
Yes I have tested it with good known caps and she checks out good . Im finding the bad caps with it . Some are checking out very bad some in question . But for most part that cap checker is working fine . It cant check 0,01 p caps , its just too low for the meter to check them anything larger it ok but smaller ones wont check with it .Im going to buy a oscilloscope from eBay or craigslist . Im thinking of small portable one like NLS-MS-215 OR 230 From NON Linear systems . I see the ham radio guys like it and seems to work very well for electronics and is easy to use too . But some of the other ones I looked at like velleman don't have much of a bandwidth . The NLS had a bandwidth of 30MHZ , but its a analog scope . The velleman is 12mhz analog .The 30 should do fine for what I want it for . I use to own a Tektronix scope but it didn't display a signal on the channels and I only paid 5.00 dollars back in 1996 . I tossed it in the trash .
|