Quote:
Originally Posted by Retro in RI
Ok. I spent a good deal of time studying this thing with it face down on my living room floor.(Padding underneath) I found the hoz output and heat sink but no large cap beneath. By cap I'm assuming a cilyndrical object (shaped like, but not neccessarily the size of, a roll of coins) with wires at each end (sorry, new b here)
I saw nothing like that. But i did see the small white caps marked 22-5001. There were at least five in and around the areas you mentioned. Where can I get these? Just unsolder and solder in new ones? How much should I pay? Any part/reference number I should ask for. What problem will replacement of these prevent?
Btw, the inside of the 63 looks way less intimidating. : o
Thanks again.
Al
|
+
They need to be changed, but they are not the one that can
destroy the set. Every one that goes bad causes the HV to go up by
1KV-2KV. Symptoms I remember are pix not wide enuf & foldover.
You may also get arcing at the HV tripler ( big red wire comes out
of it) focus pin at pix tube (CRT) socket & HV connector to CRT bell.
All in all they cause great stress to the horz & HV components.
Best bet is to find OEM replacements. You MUST use the right ones
or they will burn up fast. If you cant find OEM there is a capacitor
expert here but I dont remember his name.
Someone will pipe in & help you with your search.
73 Zeno
