Since its shown no action on the "other" list I will pick
it up here. Good advice given. If you run up the AGC to
get a nice sharp pix you can clip off the sync pulse. Usually
if to high you also get an audio buzz. If you turn down the
AGC & it gives a washed out pix BUT it syncs in go to the
video stages. One way to judge things is with NO signal.
You should get a nice strong snow with no streaking & a
nice waterfall in the audio. If it is a phase problem & not
just the 6H6 look at the feedback from the flyback to the
phase stage.
It looks like the set has a good strong jug & will give a real
pissah pix when done.
73 Zeno
