|
Finally got to finishing replacing all of the paper and electro caps in this set, including the ones under the HV area.
The TV works pretty good with 2 issues:
1) The raster comes up pretty quick but it is blank and there is no sound. Then after 3-4 minutes the image and sound start working.
2) The horizontal sync is a little messed up, see attachment. It is a little jittery and the picture is "jagged" See what I mean by looking at the number 87 on the screen.
What do you guys think to check? The tubes have been tested good in a tester.
PS, I never figured out if that loose wire I mentioned previously in the thread should be connected to anything. Looking at the schematic and based on other members replies it should not be there.
|