Hi All;
I am starting to see if I can do more Damage to my RCA 8T-244 Set..
I have power it up Via a Variac, and it does the same as the last time I powered up this Set..
I plan on Replacing the four Electrolytic Caps first and then, I will work on the Vertical Section next, as it alternates between a full picture and about a one inch line on the screen, so I assume that something gets warm and the Vertical does not work for the most part, and after cooling it works for a little while and this is repeated over and over..
But, for as old as this set is, I am amazed that it gets anything on the screen..
THANK YOU Marty