Quote:
Originally Posted by DaveWM
I can see a 4.7 meg resistor 2 watt resistor to ground, if that has opened up some I imagine the focus voltage could be too high, hope that is the case, will know for sure when I see which side of the pot the wiper is turned to.
|
If the BIG HV divider has drifted high you can compensate for it by adding series resistance to 4.7M 2W. I did that on a CCI hybrid I own, and after it drifted a couple of more times in the following year(which caused me to bump up the added series resistance), it found a stable good point that it has sat on for the last three years.