Quote:
Originally Posted by Electronic M
Swapping the yoke will involve redoing most or all of the following adjustments: purity, static convergence, dynamic convergence, centering, vertical height/linearity, HV, and focus.
Not exactly a cake walk (especially if you're not familiar with the first three), but once one reaches the level of familiarity I have with those adjustments you can get it right in a couple of hours give or take.
You may be able to get most of those right easier by marking the exact positions of everything before teardown.
|
I've done all those things to this set already, so I'm familiar with the process. Just the thought of removing all those pieces and putting them back would be a first for me.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|