Thread: Akai VT-110
View Single Post
  #7  
Old 04-09-2014, 06:12 AM
jlb2 jlb2 is offline
VideoKarma Member
 
Join Date: Aug 2009
Posts: 14
Hi Lutello,

I see that you need the service manual for your VT-110 I have not found it for free, but googling "Akai VT-110 service manual" should bring up a few sites that sell service manuals. Just FYI I found the manual for my VT-120 on manualscenter.com, I think they have the manual for the VTS-110 which is the VT-110 set with camera and power supply. No affiliation, I just happen to have bought a manual from them.


Quote:
Originally Posted by LuTELLO View Post
DIN connector not here yet! I can use the battery terminals easy if you can tell me +/-. Would work well with gator clips for now.
I don't know for sure, it's not shown in the manualsand there is no marking.

Quote:
Originally Posted by LuTELLO View Post
Should I power up the motors without oiling them?
The motors on mine did not need oiling, and I don't think you can open them anyway. Give them a running test, and if they are noisy think about what you can do - but even if they're completely dry thay will not die of running for a few seconds.

Quote:
Originally Posted by LuTELLO View Post
What are the a/v in/out pinouts?
Video Ground = D
Video Out = F
Audo Ground = H
Audio Out = J

Quote:
Originally Posted by LuTELLO View Post
If you're referring to this trick, I might try it!
http://youtu.be/0UpuxWH46ug
Yes, it is the trick I used

Quote:
Originally Posted by LuTELLO View Post
Hope I have this much luck.
http://youtu.be/SGVLD2-DmjI
Let's hope so!

Quote:
Originally Posted by LuTELLO View Post
Also, the camera, without name plates, seems to be the 115 model for some reason.
It's easy to tell, the VC115 is the version with an electronic viewfinder and a C mount lens. Both cameras were compatible and I remember seeing VT-110 ads with a VC-115 camera. That's a good find
Reply With Quote