Quote:
Originally Posted by Alastair E
've been doing some experiments lately on increasing emission of mediocre/poor CRT's.
A Voltmeter was attached across the resistor to monitor current draw.
The current with the 33K is limited to a little over 4mA (4.4mA ish)
|
You can't measure current (Amperes) with a volt meter. And it is essential to remember that current measurements must always be taken with the meter in series with the circuit to be measured , not "across" it or in parallel. Probably just a type-o, but I saw the statement and thought that it would be worth noting and possibly saving your meter.