Quote:
Originally Posted by DavGoodlin
Its great to see an Emerson come out like this, a combo no less.
You did a fine job on the refinish!
Emerson is like Westinghouse's equally unusual cousin.
BTW- Pull off the vertical hold and brightness knobs, the vertical height and Linearity are accessed using a small flat blade through the hollow shafts.
If the vertical is till flaky, there are 3 or 4 resistors in the megohm range off the hgt and lin pots. Also a 10 mf cap off pin 8 of the 6AW8 video amp tube.
|
Thanks for the compliment,
and especially thanks a million for all the tips on fixing the vertical!!
I am going to try tomorrow, and will post how it comes out...
I could never even begin to repair any of these sets without the help of such knowledgeable Television repair artists!
Thanks again!