Quote:
Originally Posted by DavGoodlin
Pull off the vertical hold and brightness knobs, the vertical height and Linearity are accessed using a small flat blade through the hollow shafts.
|
Dave, that did it...
I adjusted the vertical height and linearity located behind the vertical and brightness knobs like you mentioned. I didn't have to turn them too much, and it pulled the screen down just enough.
It's a bit of an art coming up with a fine balance of the height, linearity, and centering rings to make the picture just right.
Thanks again for letting me know!
Now, there are only a few thin white lines going up on an angle across the screen at the bottom of the picture, not sure what that's from...