|
I was just private messaging with Kamakiri. I was looking closely at the schematic and diagram of switch SW501. I then realized that none of the 4 outer lugs "A," "B," "C," or "D" should be directly connected to each other. Well, I vividly recall that there is a jumper wire connecting two of these lugs together on my switch with messy solder joints. I think this explains it!
So either one portion of my switch is not functioning and someone tried to fix it this way, OR the jumper was put there during partial restoration efforts before I got the set. Not sure which two lugs are jumper-ed, but I bet based on the symptoms in my video and this incorrect jumper wire, this accounts for what is going on.
__________________
-Al
|