Quote:
Originally Posted by bigaudioal
Yeah, the more I am researching, the more I think you guys are correct and it may just be a tube.
|
Probably, but if you replaced the 5% tolerance .0039 capacitor across the Horizontal Lock coil on your Telebar, then if the substitute tubes do not cure the problem, paint a dot on that coil shaft and count your turns and direction (write them down while testing) so you can get back where you started. If turning it one way makes it worse, try turning it the other.
To paraphrase another members sig, "Perfection is hard to reach with a screwdriver unless you have a good calibrated signal generator and a good scope!" However, it this case if you are careful and don't muck it up, you probably can.
James