[Kamakiri]

So here's where I'm at with the RA-113.....

Recap done long ago, had to replace the candohms in the set also, which were dead. Well, all but one was, and then the third smoked on variac power-up.

Anyway, long story short, I've got audio on both FM and TV. For TV, I have a raster that has almost all horizontal sweep but almost no vertical sweep....but only for the most part when it's on a signal. When it's not on a signal, it seems that the raster fades. Even when it's there, it's not that bright.

Now, normally I'd go towards the resistors in the HV section (all the caps there are done, same ones Bob used in his RA-113 restoration thread), but the fact that what raster is there is coming up with a video signal has me a bit puzzled......