|
After recapping, I could not get anything on the CRT,
then noticed there was a 3 AMP fuse that was blown...
Replaced the fuse, and now I have sound and some life, but no vertical sweep...
Replaced all resistors as needed, and tubes as well.
(I did keep the brightness to a minimum during testing)
Funny thing is, when I turn the channel selector,
I do see some vertical sweep for only an instant,
the whole picture flashes, all lit up with lines, but like I said only for a split second.
I sprayed some Deoxit in the tuner, but no difference...
Could the problem with sweep be within the tuner?
|