Quote:
Originally Posted by Jon A.
Just wondering what years and chassis are known to cut a neck and how to identify the faulty-design caps and their replacements.
Thanks.
|
IIRC they were 19" T-991 chassii. Same as Zenith change any white
4 lead caps. Values are different than Zenith !
If you get any Maggy upright chassis before anything else resolder
everything on the HV side of chassis including grounds. Also
do the modules themself. Smaller sets had a board in behind
that must be done, they burned up L&R from cold joints.
Some had plug in FBT's be sure the pins arent toasty. Same
with the module pins.
73 Zeno
