|
The 19" T991 and T809 chassis, along withe the 25" T995 and T815 chassis, had the 4-lead safety capacitors. They were a high failure part and they would usually short, causing the circuit breaker to trip. Sometimes, they would open and cause the HV to blow the neck off the CRT.
To my knowledge, the 4-lead capacitors are no longer made. A few years ago, I had a T809 with a shorted cap come my way and I replaced it with a combination of Sprague HV orange drop capacitors wired in parallel to give me the right value. I guess it held up because the TV didn't come back.
Like what has already been said, bad solder connections on the flyback and modules were a very common problem.
|