Thread: GE 12t3
View Single Post
  #2  
Old 07-29-2014, 11:16 AM
pallophotophone pallophotophone is offline
VideoKarma Member
 
Join Date: Sep 2005
Posts: 102
If the CRT is still good, recap it, replace the likely bad selenium rectifiers, adding an appropriate B plus dropping resistor, and you'll have a good performer. But be careful as it has a hot chassis.(no power transformer). The capacitors are in close quarters on those phenolic boards , so work carefully.

I worked on lots of this and their variations - a long time ago. Only once did I find a defective component- a deflection yoke with a shorted horizontal turn.

Bob Hodge
Reply With Quote