Quote:
Originally Posted by Down Under
As to the flyback, I think it's original. There's a story with it though. When flaking all the tar off to recoat it, I discovered a hair thin wire sticking out of the side of the over wind. It was near the inner core of the wind, next to where the wire from terminal D (HOT plate) comes in. I'm assuming I broke something when I removed the tar, and the logical place for this strand of wire to go was to the wire that comes in from D. So I connected it there, but who knows, I may have it wrong and be causing my own problems.
I'll look at subbing a yoke this weekend, but I'm suspicious of the flyback.
|
What was puzzling from the outset was that strange frequency disparity (where you said there was some sweep at 3X normal frequency, but lost it when returned to normal frequency).
it got to wondering at that point if the fly mighta been replaced and miswired. But evidently the fly is original.