|
On your RCA CTC-44, the switches attached to the power bar have a habit of going bad - we replaced them in droves. I'd leave the set in the on position and use the cable box to do the power switching.
This assumes you have the 3" wide plated on-off "bar" switch. RCA called it a paddle, IIRC.
Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
|