|
well lets see, I replaced the resistor mentioned earlier and it is away from the damper tube. Problem still there,
I wondered about the crt itself since it got bounced around. nope, replaced it and problem still there. I pulled the video out tube so the set would be raster only and the lines are still there....that was also without any signal. I am going to get new electro's that are 500 volts soon.
just asking......I thought bad or leaky electro's would put lines all the way across the screen or a wavy pattern indicating 120 cycle hum?
Plus earlyfilm had wanted to be to check for the cap in the yoke....should I just put one in or jumper in temporarily for testing?
|