Thread: No Horiz Oscillator on Zenith Porthole- Solved!
View Single Post
  #9  
Old 09-22-2014, 08:33 AM
Username1's Avatar
Username1 Username1 is offline
Not sure how I got here.
  
Join Date: Dec 2009
Location: Orange County NY
Posts: 3,649
Plate voltage is too low, either a resistor is open, or the tube is in saturation.
Since the G1 is too high, and the plate voltage starts out high, then
goes low.... the tube is in saturation.
__________________
Yes you can call me "Squirrel boy"
Reply With Quote