|
Replaced nearly all the paper caps in this thing, but almost none of the cans yet, still it's starting to work fairly well.
It has a bad Height control that prevents me from getting the optimal vertical adjustment but it's not too far off.
I put the 16AP4 back in it to see how it looked, it was really weak originally so I rejuved it with the Beltron, the emissions came up really good but the Cutoff reading is non existent.
I wonder if that's why it has the retrace lines, or maybe the vertical misadjustment could be causing them?
They are there even with the brightness at a minimum.
The High Voltage is good, the speaker wires got to close to the front of the metal tube and it was quite a show.
|